Floor & Wall Ltd operates throughout the UK and is one of the UK’s leading specialist contractors: Car Parks – car park waterproofing & deck coatings including expansion joints for the new build & refurbishment sector. Industrial Resin Flooring, Structural Waterproofing & Specialist Screed and grouting.
We are a company specialising in the installation of polyurethane and epoxy-based surfacing systems. We supply and install seamless surfaces, resin floors, decorative floors, safety flooring, poured floors, outdoor rubber flooring, traditional wet pour, specialist screeds and decorative resin bound stone floors.
Euro Resin Solutions, incorporating ERS Marine, is an independent and highly specialist company servicing land, marine and offshore flooring needs worldwide. From Material only supply, preparation and complete contract installation, start to finish. ERS are the sole UK stockist and importer for Syndeck resin products and the sole distributor for Sika’s new IMO approved marine range within the UK. Operatives are trained to high standard and training is an ongoing commitment for ERS. Our mission is to promote ambition and innovation to push the boundaries of our industry and allow us to provide superior products and services which benefit our customers economically and environmentally.
East Coast Flooring Ltd is an approved applicator of several leading manufacturers within the industry, using highly experienced applicators backed by advisory service. We provide a total project management system approach, starting with a free survey incorporating effective solutions, specification, free test panels or trial areas to determine the right specification to overcome your problem. In todays’ industry, improvements in Health and Safety standards increasingly requires durable low mainteance easily cleanable floors. Whether you need to improve hygiene standards, or improve safety in the workplace by means of anti-slip surfaces, colour coded areas etc., or you need oil, chemical or acid resistant floors, resin floors provide a durable and effective solution.
Dural (UK) Ltd is a German owned company established in the UK in 1992, offering high quality products and service levels. Providers of accessories and profiles for increasing the longevity of resin installations, from various stop bead edging profiles including our flexible range to create curves and patterns, flat, round or sloped capping profiles, step nosings, tactile studs and preformed movement joints either Ral matched or speckled to closely resemble the aggregate which can be completely colour matched to your projects. Dural’s catalogue is just the starting point providing bespoke profiles to solve the problem faced on site. Marketing support such as catalogues and samples are freely available.
Resin Flooring tailored specifically for the customer. At Deva, we don’t match the clients needs to a product, we design a resin flooring system specific to their needs. All our products are designed at base systems, created to evolve with the required specifications. Working in partnership with Europe’s leading resin manufacturers, we supply and install a large range of quality, eco-friendly floor systems using up to 80% recycled material manufactured at our Chester factory. We will help identify the optimum flooring system for the businesss environment and to satisfy their requirements.
Denholm Industrial Services delivers efficient, wholly compliant, value-added industrial services soutions to our customers with the aim of being the partner of choice for both first time and repeat contracts. Denholm Industrial Services has an extensive track record spanning more than thirty years in the delivery of Surface Preparation. Denholm Industrials Services are fully committed to a positive Health and Safety culture and have been successful RoSPA Gold Medal winners for seven successful years. We pride ourselveson being a quality driven ISO accredited organisation with a proven track record of delivery.
Degafloor is the home of Ultra-fast curing, highly slip-resistant, visually stunning and extremely durable resin solutions. Our products include industrial and commercial resin flooring, car park decking and concrete repair products for a wide range of uses across many industries. Based on our extensive experience, and regardless of the challenge faced, Degafloor has the skills, resources and expertise to deliver a cost-effective, aesthetic and durable solution tailored to your exact needs. We regularly solve problems for customers in food and beverage production, commercial kitchens, retail, leisure, pharmaceutical, education, engineering, stadia, commercial and car park environments.
Established in 1977, CONICA develops, manufactures and supplies an extensive range of decorative flooring, industrial flooring and car park waterproofing finishes, in addition to an unrivalled range of high quality solutions for sports and playground surfacing. The UK facility is based in Newark on Trent, Nottinghamshire and includes a modern tyre recycling facility which produces rubber granules and colour coated products for surfacing solutions. The CONICA brand may be new to some, but the company’s rich heritage includes periods when the business has been part of BASF and Degussa. The current resin flooring range draws on over 40 years’ expertise and experience, allowing CONICA to offer to outstanding solutions for today’s flooring demands. Regardless of whether you need a polyurethane, epoxy or polyaspartic based system, CONICA can offer a high performance solution.
Coatech is a long-established resin flooring contractor founded in 1987. Coatech remains today a family-run company with a high focus on customer care, quality and personal touch to managing clients projects. As an independent contractor and approved applicator of a broad range of resin systems, we offer clients sound specification advice that best fits their surfacing requirements. All projects are undertaken by a highly qualified and experienced management and site team to ensure total client satisfaction from project conception to completion. The team has a variety of professional qualifications such as SMSTS, SSSTS, IOSH and NEBOSH and the company supports FeRFAs NVQ programme. We are working towards achieving ‘Zero Waste to Landfill’ and we recycle our waste wherever we can. Coatech’s client base, reputation and repeat custom is a testament to our skills and quality of workmanship. The company is accredited by CHAS, Safecontractor, SMAS Worksafe, TrustMark and Constructionline. With wide experience working across different sectors, markets and industries, Coatech also works closely with the CITB to continually train and develop its team, and also with organisations such as the Princes Trust to create Apprenticeship opportunities. We have won several awards for our commitment to training and in recognition of the skills of our apprentices and managers.
Central Flooring Services are one of the UK’s premier installers of high performance resin flooring systems for industrial, commercial and sports sectors. Operating throughout the UK it provides clients with a bespoke and highly competitive installation service from consultation and specification through to preparation and application. Working closely with all the industries leading resin flooring manufactureres, Central Flooring Services have the flexibility and freedom to provide clients with the best solutions and standards possible. Constantly moving forward in an ever-changing industry, the company provides the best service for clients to minimise disruption in any environment. Central Flooring Services is an Achilles, CHAS and Safe Contractor accredited company and has achieved ISO 14001, ISO 9001 and OHSAS 18001 Certificates.
Aztec Screeding is a diversified, forward-thinking resin and screed contractor focussed on supplying the needs of its extensive client base. With 45 years expertise in the industry Aztec Screeding offers complete floor zone solutions – inclusive of all FeRFA type resin finishes 1 – 8 but specialises within resin screeds and wall finishes. Our screed division are diversified and we are proficient in traditional screeds, specialist screeds such as granolithic, polymer modified, pumped liquid screeds. The company holds ISO9001, ISO8001 and ISO14001, is a member of Construction-Line Gold and has CHAS accreditation, Builders Profile among others. We also provide Professional Indemnity insurance cover, one of the first in the UK to do so within our specialist industry, all of which demonstrates our dedication to design, health, safety and environmental policy. The company strives to be a specialist contractor that is second to none, a tall order but one all its dedicated staff are striving to achieve.
A unique floor can determine the atmosphere of a room or workplace. Arturo offers a wide range of possibilities and pushes the boundaries of what a floor can do. Arturo provides the perfect solution for either epoxy or polyurethane resin flooring subject to either light or heavy duty usage. The countless options available have been built upon decades of expertise and experience. All products are solvent-free and produced in accordance with ISO 9001 and ISO 14001 standards. Arturo is part of Uzin Utz UK Ltd, which provides the UK’s flooring professionals with ecological, innovative and high quality solutions.
For more than 60 years, ARDEX has been a quality leader for the flooring and tiling industries, the brand of choice for installers and distributors. ARDEX today is still an independent family-owned business. This means that in our permanent efforts to achieve market-shaping innovations, we have been able to retain our most important tradition: uncompromising quality. This is something we guarantee by applying the latest rigidly enforced quality assurance procedures, making it no coincidence that ARDEX is regarded as a premium partner of the construction industry.
Ancorite Surface Protection Ltd has its origins in the 1950s as a specialist coatings manufacturer. The company offers a unique range of surface protection services, from the supply and application of heavy duty industrial flooring and coatings, to decorative Terrazzo finishes for shopping malls and entertainment venues. Ancorite can supply from a wide range of polyurethane and epoxy resin coating and screed systems and is an approved applicator for BASF Ucrete and Mastertop, Flowcrete, Resdev, Sherwin Williams, RSL, Sika and Remmers products. The company is based at Sandbach in Cheshire with regional offices in Middlesbrough and Co. Mayo, Ireland, thus offering coverage to the whole of the UK and Ireland.
Altro have been at the forefront of innovation for almost 100 years. Today, working closely with architects, end customers, engineers, designers and contractors around the world, our insight and expertise help them transform everyday spaces into environments that can improve the wellbeing of everyone that uses them. And by consistently turning creative thinking into practical, real-world situations – that maintain the highest standards of safety and durability – Altro have become synonymous with quality. We combine the best in contemporary style with the functionality required to improve the way we all live and work, wherever in the world that may be. We are Altro.
Adamson Construction Group Ltd have over 25 years of experience installing resin flooring systems. As members of FeRFA you can be assured that we will provide you with the very best specification, installation and after care. Every project is different and often there are additional works to be carried out such as drainage, wall coatings and other civil engineering works. Even if the project is flooring only and appears straightforward, our background and experience allows us to see the wider construction implications and issues which other contractors may not anticipate.
ACO Building Drainage specialises in the development of corrosion resistant drainage systems and building products for applications across the internal and external built environments. Engineered to eliminate design risk, to optimise installation and to minimise lifetime ownership cost, every product in the range delivers exceptional levels of performance, finish and durability. For more information on our products and services please visit our website.
If you are working on a flooring project requiring any of the following we can help:
4m Floors UK Ltd is the premier name in design, supply and installation of commercial and industrial flooring systems. Our consultative approach means we listen carefully to establish what our clients want, advise on the best way forward, and then provide a solution that fits its exact purpose. Working with facilities and property managers, process engineers, architects and design and build contractors, 4m understands the diverse needs clients place on flooring projects. We have the ability to undertake works across the UK and Ireland over a broad size range. This includes large scale works, of which 4m has wide experience. Our service includes: Flowable pumped screeds, Smooth self-levelling epoxy resin, Car park decking, Surface and underground drainage works, Hygienic/decorative wall finishes, Anti-static systems, Elastomeric systems, Decorative epoxy flooring
Acid house yellow to battleship grey, flowers at your feet and pop art splashes to geometric slabs, you can have it all with Arturo Unique Flooring.
Acid house yellow to battleship grey, flowers at your feet and pop art splashes to geometric slabs, you can have it all with Arturo Unique Flooring. Thanks to the creative freedom of innovative resin flooring from Arturo Unique Flooring, floors can now be awash with pattern or colour while still being incredibly practical and exceptionally hardwearing. Designer flooring made to last. With a range of specialist resin floor finishes and complete systems to handle tasks from reception and workspace to public amenity, shop floor and beyond, Arturo Unique Flooring delivers an impeccable surface where design and colour truly shine through. Translating your inspiration at the Arturo Studio with lifelike 3D realisation, projects can be made to stand out with Arturo Unique Flooring. Working with artists, Arturo Unique Flooring can also deliver creativity from some of the most talented artists of their generation. Arturo Unique Flooring meets new CE regulations and highly skilled specialists apply product knowledge and technique to deliver stunning results in a floor finish that is incredibly durable and that will retain looks and low maintenance for its lifetime. For further information, contact Arturo on 01788 530 080 or visit www.arturoflooring.com
12,000 square metres of Flowcrete’s fast-drying, high-strength, self-levelling screed system, Isocrete 1500, have been installed at a prestigious development in London’s sought-after Mayfair district – Clarges Mayfair.
Designed by award-winning architects Squire and Partners and built by the main contractor Laing O’Rourke, Clarges Mayfair complements the historic architecture of surrounding Piccadilly landmarks. Set over ten floors, the development features stunning views over Green Park and Buckingham Palace and exceptional private wellness facilities, including a 25 metre swimming pool, fully equipped gymnasium, sauna and steam room, as well as a private cinema screen and 24 hour concierge and security. Isocrete 1500 has been designed primarily for new construction where finishes such as carpets, ceramic tiles, vinyl, linoleum wood block or cork need to be applied quickly. It may be used as a screed to receive an epoxy resin finish in areas taking light traffic. Isocrete 1500 can be walked on in as little as two hours, speeding up construction schedules and allowing follow-on trades early access to the site, therefore no longer having to wait days or weeks for the screed to cure. A second screed system from Flowcrete, Isopol SBR, was also used in the spa and swimming pool area on accounts of it moisture tolerance. Isopol SBR is a styrene butadiene polymer latex screed additive and bonding agent. It is used to produce polymer modified wearing screeds for heavy duty and industrial flooring and for rapid drying, levelling screeds (minimum 10 mm thickness) to receive various types of floor finishes.
When a leading food producer approached Ultrasyntec for direction and suggestions regarding one of their warehouse floors, the team faced a difficult issue. The area in question, measuring a total of 1984m2, was currently used for storing food packaging, manufacturing equipment and other items.
Unfortunately, a previous regulatory audit had resulted in the client being instructed to have all concrete floors sealed so that there would be no chance of cross contamination from packaging and other materials. The intention was to transform this entire area into a food production-ready site by 2020, which would require spending a substantial amount of money at a later date to make the site suitable for producing food for human consumption. For this interim solution, Ultrasyntec recommended a full captive shot blast to clean the tired old floor and get rid of any historic oil and substance spillages. Once this was complete, the team followed up with localised floor and joint repairs using a mixture of robust polyurethane mortars and epoxy fillers to bring the surface up to standard. Work on the entire area was split into two halves so that existing packaging and machinery could be retained within the space whilst work was carried out. When the substrate had been suitably prepared, Ultrasyntec applied two coats of Resdev’s Pumaseal PC Silk – a hard-wearing polyurethane sealant, in an attractive and practical mid-grey colour. All roller shutter doorway areas and fire escape exits were treated with a slip-resistant dressing for enhanced health and safety, and all RSJ stations were prepared and coated to a height of two metres using a safety yellow epoxy paint for added visibility. The Ultrasyntec solution provided the client with a cost effective, hard wearing floor, capable of giving significantly more than the two-year life required before the site would be transformed again.
Resin floor coverings had presented many problems in the past for Unipart House in Cowley, Oxfordshire, due to the fact that the majority of their substrate was made from asphalt.
Unipart asked Zenith Pola Flooring to specify and design a unique system capable of bonding to the asphalt, with the characteristics to withstand both industrial and foot traffic. In particular, they wished to create a ‘showpiece’ area, measuring 1000m2, for displaying to clients, calling for a solution that provided a totally seamless, durable finish, which could be guaranteed for a number of years. Therefore Zenith turned to Arturo for a specification. Zenith first utilised FM 30 industrial top in conjunction with RR 201 fibreglass reinforcement. This provided a loosely laid mesh that dispersed into the industrial top when laid, ensuring the strength and characteristics necessary to work on the asphalt substrate and providing a suitable base for the resin finish. Once the base had been primed, Zenith applied a 2mm Arturo EP 2500 epoxy self-smoothing resin system, producing a completely seamless, low maintenance, hard wearing finish, with an additional Arturo PU 7900 satin seal coating ensuring extra scratch resistance. The project was completed on schedule and without any problems. The floor was exceptionally well finished resulting in a very durable hard and wearing surface. The seamless nature of the resin flooring means that dirt and dust cannot accumulate within it, making it easy to clean and maintain.
Bespoke Altro resin floors have been developed to complement the innovative design of the new Jerwood Gallery in Hastings.
The Jerwood Gallery is a £4m new gallery on the seafront in Hastings, housing the Jerwood Foundation’s collection of modern British paintings and drawings, and a curated exhibitions programme of contemporary art across disciplines. The building is a subtly faceted form clad in hand-glazed ceramic tiles, enclosing carefully calibrated internal spaces drawing in the views from the spectacular location and encouraging a sense of exploration and surprise. The gallery opened in March 2012 and recently won a Public and Community Award from the Sussex Heritage Trust. The architect, HAT Projects wanted a terrazzo style floor that had a texture to it, a slight warmth and movement. Altro worked closely with contractor Surtech Flooring who recommended Altro Terrazzolite EP resin flooring as the basis for the bespoke mix. Hand-made samples using different coloured marble chips were created and a pale pink was chosen for the galleries and foyers, and a darker pink for the toilets and café, which are lovely warm shades.” Altro Terrazzolite EP is a decorative four-part solvent-free epoxy resin system, and has been hailed as a revolution in resin flooring. It’s a lightweight, seamless, sophisticated marble-look resin that delivers a touch of class to public and communal areas. It uses naturally coloured marble chips bound together with a coloured epoxy resin and is then ground and polished. It has a nominal thickness of 6mm and uses matching sections of perimeter skirting which are preformed off-site.
The thousands of sport and music fans entering Wembley Stadium do so via a series of ramps made safe to use thanks to Entech Services and RonaDeck Resin Bonded Surfacing.
Wembley Stadium, home to the FA Cup and venue for the football finals of the 2012 Olympics, can house 90,000 seated fans and a further 15,000 standing. These enormous crowds of sport and music fans enter the stadium via a series of ramps which lead into the stadium at five levels. RonaDeck Resin Bonded Surfacing was chosen to provide a hardwearing and slip resistant surfacing to the tarmac ramps, ensuring that crowds can gain access to the Stadium in safety in even the wettest of weather conditions.
Only three racket courts have been built in the UK during the last century, of which two have had the playing surface supplied and laid by Ryebrook Resins.
Rackets began as an 18th century pastime in London and has changed little since that time. It is played in an enclosed court and only three racket courts have been built in the UK during the last century, of which two have had the playing surface supplied and laid by Ryebrook Resins. Guests attending the opening of the new court at Tonbridge School had the opportunity to play on the court, with its unique red floor before a special exhibition match.
This community religious centre project in Leicester required a decorative, resilient, marble like finish and entailed intricate detailing at differing angles
This sensitive project at a community religious centre in Leicester had to be carried out avoiding prayer times – which were held five times a day. The community funded project required a decorative, resilient, marble like finish and entailed intricate detailing at differing angles and also vertical finishes. This required the commissioning of specially made hand trowels to fit the angles and absolute precision on the part of the floorlayers. An Altroscreed Quartz in Opal was chosen for the finish and the whole community is delighted with the finish.
What is believed to be the largest single resin bound surfacing project in the UK has been completed using Ronacrete’s RonaDeck Resin Bound Surfacing System where more than 7,500m2 has been laid.
The London Borough of Hammersmith and Fulham required 7700 square metres of resin bound surfacing to the paths and to paved areas within the park. This was part of a refurbishment project which included improving the routes across and around the Green as well as the planting of further trees and the creation of two children’s play areas. The RonaDeck Resin Bound Surfacing system was supplied as a two-component UV stable polyurethane resin, this was to be mixed with the Maple Harvest aggregate which the Borough had selected. The resin components were mixed with a slow speed drill and paddle before being added to a large forced action mixer containing the aggregate. Once the aggregate was fully coated with resin operatives spread RonaDeck Resin Bound Surfacing to level and smoothed the surface with a steel float. The finished surface was ready for foot traffic in four hours.
Remmers provided a make over for the Beauty Shop in Huddersfield with two new co-ordinated colours for the treatment and tanning rooms.
The Beauty Shop in Huddersfield required an upgrade to the flooring of the ground-floor treatment and tanning rooms. Although the existing floor was still in relatively good condition, the Salon required a change to the original colour scheme and selected a two coloured Remmers Colorid Flake system to be installed throughout. The revamp also required a corresponding darker floor to be installed in the tanning room due to the nature of the treatments. All of the floor areas were initially prepared; base coated with Epoxy BS3000 and then flaked with Colorid. All areas were then sealed with Epoxy UV 100 and two coats of Remmers PUR Aqua Top M to create the specified colours and design. The works were completed with minimal disruption, meaning the Beauty Shop was quickly able to re-open for business.
Central Flooring Services has just completed a 600m2 concourse at the Olympic Park Velodrome. The specification called for the grinding of the existing concrete followed by the installation of a new resin flooring system with high durability and aesthetics.
A part of the legacy work to convert the Olympic Park into the Queen Elizabeth park, Central Flooring Services has installed a 600m2 resin flooring system to the concourse. Once the existing concrete floor had been fully ground and vacuumed all cracks and chips were repaired with an epoxy repair mortar and then coated with two coats of Sika 264 epoxy high build coating. To provide excellent durability and a high aesthetic look a further clear matt coat of Sika 365N was applied. The legacy committee, which is overseen by Lord Coe and the Mayor of London, worked with Central Flooring Services for the product and colour choice and were responsible for inspecting the project for signing off, so it was critical for the job to be of a high standard. A full ITP (inspection and testing programme) quality procedure was produced to ensure the completed project was handed over to a completely satisfied client with no defects.