Suitable slip resistant walkways

Zircon provided the long-term, slip resistant solution for these walkways, ensuring staff have a safe, hard-wearing surface on which to work.

A quick turn around was needed for this well known tool manufacturer. They required their existing flaky painted walkways replacing with a slip resistant surface suitable for a heavy duty traffic crossing.

We firstly prepared the area by means of dust free diamond grinding & scarifying.

The first and second coat of Remmers MT100 Primer was installed.

Following on from the primer we installed Epoxyflex PH (2mm) adding an accelerator to speed up the curing times.

Once that was fully cured we installed  Remmers Epoxy PH using rollers and brushes, we then broadcast Aluminium Oxide into the wet resin and back rolled it to create a slip resistant surface.

Finally we installed the yellow demarcation lines to create the ends of the walkways. 250m²