High Build Epoxy Resin Coating System to Machine Area by PSC Flooring

PSC Flooring Limited have recently completed floor refurbishing works to a 172 square metres print machine area for Advanced Coated Products Ltd – a supplier of specialised coated films based in Cheltenham. At the site visit it was evident that the floor had been previously resin coated over 10 years ago and was very worn and tired. The client was looking for a complete refurbishment leaving the floor hard wearing and easy to clean for years to come.

In order to get the floor ready for the new floor surface it was necessary to remove failed floor coatings and thoroughly clean and prepare existing resin floor surface. The main floor area was ground back using a triple headed diamond grinding machine and the edges were completed with a handheld diamond grinder. The area was the vacuumed clean of all dust and residue before repairs were made to localised damaged concrete, holes and cracks using epoxy resin filler. As there was one particular machine that used silicone, a coat of Resdev OCS oil tolerant epoxy resin primer was laid to 40 square metres of silicone affected area to neutralise the silicone.

The area was divided with a 46 square metre walkway being masked out. Two coats of Resdev Pumatect high build epoxy resin flooring system, in the client’s chosen Light Grey Ral 7035 were laid to 126 square metres with the 46 square metre walkway receiving two coats of Resdev Pumatect high build in Red (Ral 3009). 75mm wide edging lines were then masked out and given Resdev Pumatect V high build epoxy resin in safety yellow to 58 linear metres.

Adrian Daunter of Advanced Coated Products Ltd commented, “The floor of the print machine area is completely transformed.” Great to hear from another satisfied customer –  job completed in just 4 days, on time and on budget!

www.pscflooring.co.uk

Credits