Workshop Floor at Mercedes Dealership in Stockport
The automotive sectors are one of the main areas which you can find resin flooring. This can be from dealership showrooms, workshops and parts areas as well as car storage. In this instance, a large dealership of Mercedes vehicles was in need of a non-slip resin flooring system to the workshop, parts area, valet bays, wash bays and tyre storage areas which needed cosmetic repair and resin flooring. As the building was a new build, the concrete surface was not in disrepair so we did not have to conduct any resin floor repairs.
Firstly, we prepared the floor ready for installation and then applied a 3mm slip-resistant floor system. Monargrip is an epoxy resin flooring grip system with added aggregate within a multi-layer system to aid in the grip of the floor (this can be either for pedestrian grip or vehicle tread). By using a Monargrip system on a workshop floor, you can have a durable flooring system which had added slip resistance in both wet and dry conditions. It also provides a level of chemical resistance to the floor.
This project was a total of 4,000 sqm. We then also installed Monargrip to other sites for the same company. These were in Dartford and Birmingham. They also had workshop floors which were in need of a non-slip industrial floor system.
More About Us
Monarch are epoxy resin flooring contractors who install workshop floors across the UK. We also install polyurethane and fast curing resin systems to a wide range of automotive and industrial settings. A non-slip resin flooring solution is a great way to increase the grip of a floor. It is also a durable and hard-wearing flooring system. We have offices in Derbyshire, Yorkshire and Lancashire and work throughout the UK as specialist resin flooring contractors.
You can get in touch with Monarch by completing the contact form below. You can also take a look at our contact page to find more ways to get in touch with us.
Our latest news
For the latest news on FeRFA, its members and the industry.
Surface preparation, removal and finishing operationsgenerate dust. As the one-stop-shop for surfacepreparation projects from 5m2 to 50,000m2, there’s nodust on […]
23rd June 2022
A New Dimension in Surface Preparation
Husqvarna Construction has launched the first wave of its recently rebranded Blastrac and Diamatic surface preparation product range. The fully […]
15th June 2022
Revamped Mapei World London City Specification Centre reopens in Clerkenwell
Mapei has re-opened its Specification Centre – Mapei World London City – following a full refurbishment. The dedicated specification space, […]
25th May 2022