TELEPHONE: EMAIL FERFA07484 075 254
As part of a building project at the University of Birmingham, 1075 sqm of Ronadeck paths were laid for the new student accommodation.
A major building project at the University of Birmingham involved building new student accommodation and external works to some of the existing buildings. As part of the development and refurbishment new paths were laid leading up to and around the accommodation. 1075 square metres of resin bound surfacing have been laid on the paths to create a durable, slip resistant and aesthetically pleasing surface for the students to walk on. RonaDeck Resin Bound Surfacing with a Harvest Crunch aggregate blend was laid on a prepared asphalt base. The system was supplied as a two-component UV stable polyurethane resin to be mixed with a blend of kiln-dried decorative aggregates. The two components of the resin were mixed with a slow speed drill and paddle before being added to a large forced action mixer containing the aggregate blend. After ensuring that the aggregate was fully coated with resin, the RonaDeck Resin Bound Surfacing was spread to level and smoothed with a steel float. The finished surface was ready for students' feet within four hours. Ronadeck Resin Bound Surfacing satisfies SuDS requirements, allowing rainwater to quickly and easily drain through the porous surface. All blends have been tested for slip resistance in wet and dry conditions; test results show the risk of slip to be low. RonaDeck Resin Bound Surfacing is a UV stable resin bound aggregate surfacing; its functional properties and decorative appearance make it an attractive choice for a wide range of paving applications.
If you would like to receive our Newsletter and get all the latest updates, please enter your details below. FeRFA will not disclose your details to any third party. All emails include an unsubscribe link.