TELEPHONE: _07484 075 254

The Trade Centre, Neath Wales

The new Neath branch of The Trade Centre Wales is given a Remmers floor from TPS360 that meets the demanding requirements of a busy automotive facility.

The new 1,600m2 automotive workshop facilities at The Trade Centre in Neath required a breathable anti-slip system to be installed. Due to the relatively new substrate and uncertain moisture levels at the time of specification, a breathable flooring system was recommended which would eliminate potential pitfalls during the installation phase. The installers TPS360, measured the moisture levels during the installation and to facilitate the curing process, temporary heating and ventilation systems were used to reduce any moisture present. TPS360 used a state of the art HTC diamond grinding system to provide a first class substrate for the application of the resin coatings. A FeRFA Type 3 high build floor coating system was then applied in two coats. Remmers BS 3000 SG was selected as a high quality, damp tolerant resin, with a wide application spectrum and VOC free properties. ADD 250 Polymer Beads were then added to provide an anti-slip, textured finish to give a surface that remained easy to clean. It was essential that the coating system was installed within a timed scheduled to fall in with other key equipment installation phases that were also tied to a fixed programme.

View Case Study


Remmers (UK) Ltd   
TPS360 Ltd



If you would like to receive our Newsletter and get all the latest updates, please enter your details below. FeRFA will not disclose your details to any third party. All emails include an unsubscribe link.

First Name:
Last Name:
Your Email:

FeRFA Contact Details

PO BOX 3716, 

TELEPHONE: 07484 075 254


Follow us on Twitter

Registered in England No 954060
VAT Registration No 320 5799 58
© FeRFA the Resin Flooring Association     DISCLAIMER

Fair PaymentCobra Insurance Brokers LogoReduce Reuse Recycle Logo